print ]RECYCLING OF SWIMMING-POOL WATER AS-POOLREC
The system of recycling of swimming-pool water is based on own long-term development of membrane and water-purification processes. The development, pilot unit operations, and system simulations under real conditions of swimming pools resulted in the innovative solution called AS-POOLREC.
The AS-POOLREC technology is built on a two-step system of membrane filtration, including several steps of pre-treatment of washing water produced in the pool filtration system. The final product is crystal-clear water meeting all the requirements of Regulation No. 238/2011 Coll., and – in the relevant indicators – also Regulation No. 252/2004 Coll.
Apart from the removal of all bacteria, viruses , and general germs, the AS-POOLREC recycling system also provides for sharp decrease in conductivity, concentrations of TOC (Total Organic Carbon), CODMn, nitrogen-containing substances, and overall water hardness.
Why should be swimming-pool water recycled?
Such an easy question deserves an easy answer – and it is simple: because the recycling of swimming-pool water brings about substantial savings in quantities of consumed water in the operations of public swimming pools … and this is not all! The AS-POOLREC process of recycling of swimming-pool water sets a new yardstick in the service of water parks, outdoor baths, public swimming pools, and wellness centres. The AS-POOLREC system represents a sophisticated combination of quick return on investment and permanent environmentally friendly approach.
AS-POOLREC advantages
- Return on investment within two years
- Improved operational economy of your aqua park, open-air bathing place, wellness centre, ...
- Fundamental reduction in the quantities of fill/add-up with drinking water or feed water to swimming pools
- Reduction in costs of heating of swimming-pool water
- Extended life-time of heat exchanger systems
- Reduction in quantities of dosed chemicals necessary for swimming pool operations (namely: H2SO4)
- Limitation of fixed chlorine formation in the swimming pool technology system
- Compact design, small footprint
- Open-end system with the possibility of utilisation of existing elements
- The system can be constructed in a container design
- Fully automated system with minimum maintenance requirements
- Possibility of pilot operations before the very installation
- Process supervision
- First class workmanship and components - GRUNDFOS, CALPEDA pumps, FIP piping system, PLC SIEMENS, DOW/INGE membranes, and GREISINGER transducers
- References in the Czech Republic as well as abroad
- Also possible in the container design
- Fully compatible remote control & management
Standard control system
- Automatic / manual regimes of all components
- Flowrate measurements (at feed/discharge)
- pH of feed and discharge, conductivity level
- Indicators for accumulated water volume
- Component lifetime indications (in hours)
- Graphic presentation of operational regimes/conditions
- Alarms, statistics, accesses
- Pressure values on feed, operations, and discharge
- Online trans-membrane pressures
- Water temperature measurements
ASIO TECH will provide you
- Field trips round the systems built by us (our references)
- Pre-design study, enumeration of return on investments
- Pilot operations at your place with our own pilot unit
- Detailed design documents
- Negotiations with the relevant governmental authorities
- Complete supply of process equipment
- Laboratory analyses, complex testing
- Interconnection with the local instrumentation systems
- System commissioning and tuning
- Process supervision after the system commissioning
- Servicing contract and supplies of chemicals
- System optimisation in case of changes of operating conditions
