The system of recycling of swimming-pool water is based on own long-term development of membrane and water-purification processes. The development, pilot unit operations, and system simulations under real conditions of swimming pools resulted in the innovative solution called AS-POOLREC.
The AS-POOLREC technology is built on a two-step system of membrane filtration, including several steps of pre-treatment of washing water produced in the pool filtration system. The final product is crystal-clear water meeting all the requirements of Regulation No. 238/2011 Coll., and – in the relevant indicators – also Regulation No. 252/2004 Coll.
Apart from the removal of all bacteria, viruses , and general germs, the AS-POOLREC recycling system also provides for sharp decrease in conductivity, concentrations of TOC (Total Organic Carbon), COD
Mn
, nitrogen-containing substances, and overall water hardness.
Why should be swimming-pool water recycled?
Such an easy question deserves an easy answer – and it is simple: because the recycling of swimming-pool water brings about substantial savings in quantities of consumed water in the operations of public swimming pools … and this is not all! The AS-POOLREC process of recycling of swimming-pool water sets a new yardstick in the service of water parks, outdoor baths, public swimming pools, and wellness centres. The AS-POOLREC system represents a sophisticated combination of quick return on investment and permanent environmentally friendly approach.
AS-POOLREC advantages
-
Return on investment within two years
-
Improved operational economy of your aqua park, open-air bathing place, wellness centre, ...
-
Fundamental reduction in the quantities of fill/add-up with drinking water or feed water to swimming pools
-
Reduction in costs of heating of swimming-pool water
-
Extended life-time of heat exchanger systems
-
Reduction in quantities of dosed chemicals necessary for swimming pool operations (namely: H
2
SO
4
)
-
Limitation of fixed chlorine formation in the swimming pool technology system
-
Compact design, small footprint
-
Open-end system with the possibility of utilisation of existing elements
-
The system can be constructed in a container design
-
Fully automated system with minimum maintenance requirements
-
Possibility of pilot operations before the very installation
-
Process supervision
-
First class workmanship and components - GRUNDFOS, CALPEDA pumps, FIP piping system, PLC SIEMENS, DOW/INGE membranes, and GREISINGER transducers
-
References in the Czech Republic as well as abroad
-
Also possible in the container design
-
Fully compatible remote control & management
Standard control system
-
Automatic / manual regimes of all components
-
Flowrate measurements (at feed/discharge)
-
pH of feed and discharge, conductivity level
-
Indicators for accumulated water volume
-
Component lifetime indications (in hours)
-
Graphic presentation of operational regimes/conditions
-
Alarms, statistics, accesses
-
Pressure values on feed, operations, and discharge
-
Online trans-membrane pressures
-
Water temperature measurements
ASIO TECH will provide you
-
Field trips round the systems built by us (our references)
-
Pre-design study, enumeration of return on investments
-
Pilot operations at your place with our own pilot unit
-
Detailed design documents
-
Negotiations with the relevant governmental authorities
-
Complete supply of process equipment
-
Laboratory analyses, complex testing
-
Interconnection with the local instrumentation systems
-
System commissioning and tuning
-
Process supervision after the system commissioning
-
Servicing contract and supplies of chemicals
-
System optimisation in case of changes of operating conditions
